Attaching The Walls To Each Other For The Diorama Building. Attaching the walls to each other use some clear tape to hold the walls to each other while the glue dries. I like to put the tape on the end walls so when its time to glue everything together the tape is already there. Using the tape seems to work better than clamps, they seem to move it around too much & it is hard to adjust to get it square.
The end wall sits right inside the side wall so put some glue on the triple 2” x 4”s and assemble the side wall to the back end wall. You can use a board to set it on so you have something to square it up with or you can use a piece of graph paper with a piece of glass on top of it to square everything up. Using the graph paper with a piece of glass on top keeps everything from sticking to the graph paper & making a mess to get apart.
When everything is dry use a utility knife & cut out the lower door supports they are no longer needed. Remember we left them in to help support everything & keep it square but now’s a good time to cut them out.