Sheeting Attached To Studded End Walls For The Diorama. The end walls will be glued just like the side walls remember to make sure the studded wall is even with the bottom of the hardboard. The trusses will sit on the top plate of the end studded walls so if they are not even with the bottom they will end up sitting above the end walls & you will see the roof trusses from the ends of the building above the side walls which you don’t want.
There is also a small gap between the side of the framed studded wall & the edge of the hardboard that is because the side wall will sit inside the gap & the studded walls will attach to each other. Remember the side studded wall had triple 2” x 4”s on the ends that is where they will meet & be glue together.
If you decide that you want to paint or stain the interior walls or paint or stain the studded walls it may be a good time to do it before you glue these pieces together. Once you glue these pieces together it will be much harder to paint or stain them unless you are doing everything the same color.